Linksys Re9000 Extender Setup: A Step by Step Guide
Linksys re9000 extender setup: Boost the range of your existing wireless network in hard-to-reach areas of your house such as garden, bedroom, or garage with the help of Linksys RE9000 extender setup guide. This device makes sure that you get a blazingly fast connection speed for all your devices such as laptops, iPads, tablets, gaming consoles, and a lot more. Moreover, it also provides four antennas and a powerful amplifier to provide you an unparalleled range and power. In this article, we’ll have a look at the step by step approach for Linksys re9000 extender setup.
- First of all, you need to connect your wireless range extender to a stable source of power. So, take the power adapter and connect its bottom to your extender. After that, connect the head of your power adapter to a power outlet. Then, you need to press the power button on your extender for a while. As soon as you see a solid green light on the LED panel, you can make sure that the extender has been successfully turned on. Now, you need to establish a connection between your router and your wireless range extender.
- Basically, there are two broad ways to connect both of your devices – wired and wireless. In this article, we’ll have a look at the wired method to connect both your devices. To do so, you need to have an ethernet cable in place. Connect one end of the ethernet cable to the router and the other to your extender. After that, make sure that the LED light has turned white to ensure a proper connection. After connecting both the devices, you need to turn on your PC or smartphone in order to proceed with the Linksys re9000 extender setup.
- In your PC or smartphone, you need to open the wireless network manager and scan for an available range of networks. Among the networks found, you need to connect with the one named “LINKSYS_EXT”. If it asks for a password, you need to enter the one you use for your router. After connecting, you need to open a browser of your choice. However, you need to make sure that the browser is up to date. In your browser, you need to navigate to the top to find the address bar. In the address bar, enter the website Extender Linksys Setup and hit the enter button on your keyboard.
- Now, as soon as the website loads, it will ask you for a username and password. The credentials can be found at the bottom of your extender. After logging in to the website, you’ll see a blue button with “Linksys Range Extender Setup” written on it. All you need to do is click on the button and wait for the automatic setup wizard to start. After that, you’ll get a set of instructions on your screen. All you need to do is follow the instructions on your screen unless you see a finish button.
And that’s it! You have successfully completed your Linksys re9000 extender setup.