skip to Main Content
linksys access point setup

Linksys Access Point Configuration: A Guide for Beginners

Setting up a Linksys access point can be a great way to extend your wireless network coverage and improve connectivity in your home or office. In this article, we will discuss the Linksys access point setup process, as well as some common issues and troubleshooting steps. Linksys access point configuration is necessary if you want faster WiFi.

Not to worry! It’s not difficult for Linksys access point setup. Follow the instructions in this page to easily learn how to set up a Linksys access point. However, make sure you are using one of the following extenders before you begin the setup process:

The extenders listed below can be set up in access point mode.

  • Linksys RE6400 AC1200 BOOST WiFi Extender r
  • Linksys RE6500HG AC1200 Dual-Band WiFi Extender 
  • Linksys RE6700 AC1200 Amplify Dual-Band WiFi Extender 
  • Linksys RE7000 Max-Stream AC1900 WiFi Extender
  • Linksys RE6800 AC1750 WiFi Extender

Now, follow the detailed steps below to learn how to set up a Linksys access point.

How Do I Set Up Linksys Extender as an Access Point?

Here are some important steps that may help you for the Linksys access point setup. So read these steps carefully.

1. Charge Your Extender

  • Connect your Linksys extender to a wall outlet and turn it on.
  • When the LED turns entirely green, keep an eye out for it..
  • Note: Ensure that the power supply coming from the wall outlet to your Linksys range extender is stable.

2. Set Up WiFi on Your Devices

  • Establish a connection between your home router and your Linksys access point setup.
  • Both devices can be linked together wirelessly or with an Ethernet connection. Your decision is yours.

Note: If you connect your extender and wireless router with an Ethernet cable, make sure it is in good condition. If not, you can have technical problems.

3. Access
  • Turn on your PC after your Linksys extender and router have made a solid connection.
  • Launch the web browser of your choice.
  • Put in the browser’s address bar.
  • The Enter key should be pressed.
  • Note: Use the default IP address instead if your extender’s default web address won’t work for you, or get in touch with our knowledgeable technical professionals.

4. Find the Settings Menu

  • You will be directed to the Linksys extender setup process as soon as you press Enter.
  • Go to the Settings section.
  • Selecting “As a wired range extender (access point)” will prompt you to click “Next”.
  • The Linksys range extender will broadcast WiFi names that you create. You have the option of making two unique WiFi names or using the same one for the 2.4 GHz and 5 GHz radio bands.

5. Establish an admin password.

  • For your Linksys wifi range extender, make an admin password.
  • Press Save. You can also include a password hint if necessary.
  • Enter your email address when requested to register your Linksys product to get updates.
  • Choose Next.

You will be able to do Linksys access point setup successfully in this way. The top header on your computer’s screen will read “Dual Band Wireless Access Point” after your range extender is in access point mode.

Common issues that occurs during the Linksys Access Point Configuration

Here are some common issues related to Linksys access point setup:

  1. Difficulty accessing the setup page: One common issue users face is difficulty accessing the setup page of their Linksys access point. 
  2. Weak signal strength: Another common issue is weak signal strength
  3. Slow internet speed: Slow internet speed is another issue that users may face after setting up their Linksys access point. 
  4. Connection drops frequently: Users may also experience frequent connection drops, which can be caused by various factors such as outdated firmware, wireless interference, or even a faulty access point.
  5. Inability to connect to the wireless network: Another common issue is the inability to connect to the wireless network.
  6. Firmware update failure: Users may face issues updating the firmware of their Linksys access point, which can result in the device becoming unresponsive.
  7. Interference from other wireless networks: Interference from other wireless networks in the area can affect the performance of your Linksys access point

Troubleshooting steps

here are some troubleshooting steps for the common issues related to Linksys access point setup:

  1. Difficulty accessing the setup page: Try accessing it from a different browser or device.
  2. Weak signal strength: Change the placement of your access point to a more central location in your home or office.
  3. Slow internet speed: To troubleshoot slow internet speed, make sure that your internet connection is working properly. 
  4. Connection drops frequently: If you are experiencing frequent connection drops, try resetting your access point to its default settings and reconfiguring it. 
  5. Inability to connect to the wireless network: Make sure that you have entered the correct network name (SSID) and password. 
  6. Firmware update failure: Try resetting the device to its default settings and trying again. 
  7. Interference from other wireless networks: Try changing the wireless channel on your access point’s settings page. 

Read More: 

How to reconnect a Linksys Extender

Setting up Linksys RE7350 Extender

Back To Top