skip to Main Content
Linksys RE7310 Extender Reset

How to reset Linksys RE7310 Extender?

The Linksys RE7310 extender is a popular networking device that can boost the wireless signal in your home or office. However, there may come a time when you need to reset it to its factory default settings. This could be due to forgotten login information, issues with weak signals, or if you plan on selling or giving away the device. 

Linksys RE7310 Extender reset can give it a fresh start and solve many problems. Or possibly you are dealing with a problem that, despite your best efforts, is not going away. This guide will help you carry out the reset procedure on your Linksys RE7310 Extender if you’re looking for instructions on how to do so.

Read more:

Linksys RE6800 Extender Setup

Linksys Access Point Configuration

Resetting Your Linksys RE7310 Extender 

Firstly, there are two different ways to perform Linksys RE7310 Extender reset. The initial method involves accessing the Linksys extender login page and going to the settings to reset it. On the other hand, the second method only requires pressing one button to complete the task at hand.

They are as follows:

  • Reset manually
  • Soft Reset

We go into more detail about both strategies for Linksys RE7310 Extender reset. You can use any of them however you see fit. However, accessing the  Linksys RE7310 Extender login page is a requirement if you want to use the software techniques. In the event that logging in is not possible, you must select the manual method.

Linksys RE7310 Extender reset in Minutes via Hard factory Reset?

Here are some steps you can follow for Linksys RE7310 Extender reset:

  • By attaching the Linksys RE7310 Extender to a working wall outlet, you can start it up.
  • To activate the device, press the power button.
  • Right now, locate the Reset button on the extender.
  • Gently push it

How to Use a Soft Factory to Quickly Reset Your Linksys RE7310 Extender?

You can do Linksys RE7310 extender reset, there are several steps you can follow to accomplish this. Firstly, it’s important to note that performing a soft factory reset will remove all of your Linksys RE7310 extender’s personal settings and configurations. Therefore, you should be cautious when performing a factory reset. Once you’re ready, there are some steps you can follow to reset the extender.

  • Join the extender’s Wi-Fi network.
  • On the device, launch a web browser and enter or type as the extender’s IP address.
  • Wait for the login page.
  • Log in using the credentials for your extender. 
  • Select “Factory reset” under “Troubleshooting” to begin.
  • Confirm that you want to reset the extender by following the on-screen instructions.
  • Be patient while the extender restarts.

Note: It’s important to note that performing a soft factory reset on your Linksys RE7310 extender has a significant impact. By performing a soft factory reset, you will be removing all of your personal settings and configurations from the device. 

Reasons to Reset the Linksys RE7310 Extender

There are several reasons for Linksys RE7310 Extender reset:

  • Troubleshooting: Resetting the extender may help fix issues with your extender, such as slow performance, weakened connections, or an inability to connect to the network.
  • Network settings change: You might need to reset the extender to update the settings if you made changes to your wireless network settings, including the SSID or password.
  • Firmware upgrade: If you’re updating the extender’s firmware, you might need to reset the device to finish the process.
  • Selling or giving the extender: If you plan on selling or giving away your extender, it’s important to consider resetting the device to its factory defaults.
  • Forgotten login information: In case you have forgotten your login information to access the extender’s settings, there is a solution to reset the device to its factory defaults. 

Everything You Need to Know About Hard Reset vs. Soft Reset

A factory reset, also called a master reset, is a procedure that erases all data and settings and returns a device to its initial state. Hard resets and soft resets are the two different kinds of factory resets. Here are each’s benefits and drawbacks:

Hard reset:


  • Make the device brand new by erasing all of its data and settings.
  • Can correct software flaws and errors that are causing issues with the device.
  • Can remove viruses and malware that are challenging to remove using other methods.


  • Erases all information, including contacts, photos, and personal files. It is a challenge to retrieve this data later.
  • Restoring all settings and data after the reset may take some time.

Soft reset:


  • Deletes all of the problematic data and settings while leaving the rest of the device’s data alone.
  • removes all data without erasing any, but only minor, software flaws.


  • Major software problems that need a hard reset might not fixed.
  • Malware and viruses that demand a hard reset might not removed.

In conclusion, a hard reset is more thorough and efficient at completely wiping a device and resolving serious software issues, but it carries the risk of erasing all data. 





Back To Top